The WiFi Greenhouse Monitor Pro is a Wi-Fi-enabled device that helps monitor multiple plants with a single base device. The Greenhouse Monitor comes with 3 Moisture sensors, an onboard Temperature and Humidity Sensor, and two external temperature sensors. It supports secure communication with the Monitoring Cloud Server or another monitoring application, such as Home Assistant. It is fully assembled and requires no soldering. Connect it to power, and it will advertise itself as a wireless access point. Configure it through a web browser using its easy-to-use config application. Once configured, it will connect to your Wi-Fi network, providing it with access to the internet, the monitoring server, the MQTT broker, and remote data requests.
The Pro Series supports both Secure and Non-Secure MQTT and Web services, enhanced control, custom configuration, and access control to settings. MQTT messaging is compatible with Home Assistant applications, including the option for Auto MQTT Discovery, eliminating the need to manually add a JemRF sensor to your Home Assistant Dashboard. When connected to the Internet for more than 10 minutes, the local AP is disabled to eliminate an unused local WiFi Network. Uses the industry-standard USB-C connection for power,
The Pro Series provides a white-labeling feature that allows custom settings and an optional password to minimize accidental changes when installed at remote locations.
Features:
- Easy-to-configure web interface. No programming or soldering skills required. You do not need the internet to configure the device. Connect to it directly from any WIFI device (e.g., PC, phone, tablet …)
- Send temperature and other data at a user-set interval
- Supports either Celsius or Fahrenheit temperature readings
- Powered either by USB-C
- Low crossion Moisture Probes with 1.3 m extended cables. Readings from 0 to 100%
- Supports and additional HTU21D Temperature and Humidity sensor. Measures temperatures from -40°C to +80°C. The Fahrenheit equivalent is -40°F to +176°F, with a ±0.5°C accuracy—measures humidity from 0-100%RH with 2% across the range.
- The external DS18B20 temperature sensors are accurate (±0.5°C) from -40°C to +80°C, with an upper limit of 120°C.
-
**Note: The operating temperature for the WiFi Temperature sensor is -30F to +125.6F, -34C to 52C.
- The device supports dual-WIFI mode, allowing it to act as both a WIFI access point and a WIFI client simultaneously. A Wi-Fi access point advertises its SSID and can be connected to by any Wi-Fi device or computer.
- Once the unit has been online for 10 minutes, the local AP is disabled for security reasons.
- A White Label option is supported for site customization.
- Optional JST-XH 2.0 2-pin connector with 6" lead for remote flow sensor.
- JST-XH 2.0 2-pin connector with 6" lead for External 3.2 VDC support.
Required, but not included:
- USB-C cable and USB power supply.
Installation:
Specs:
- Dimensions 74mm x 55mm x 28mm
- Powered either by a USB-C cable or an optional 5Vdc, JST PH2.0 connector
- -34C to +52C. Fahrenheit equivalent is -30F to +125.6F, ±0.5°C accuracy from -10°C to +52°C
