WIFI Temperature and Humidity Sensor Pro Plus

WIFI Multi Sensor Pro

The WiFi Temperature and Humidity Sensor Pro Plus is a Wi-Fi-enabled device that connects directly to your Wi-Fi router. It comes with an internal temperature and humidity sensor and can be configured to support multiple external temperature sensors. All sensors report to the Monitoring Cloud Server, your MQTT broker, or another monitoring application. It is fully assembled and requires no soldering. Connect it to power, and it will advertise itself as a wireless access point. Configure it through a web browser using its easy-to-use config application. Once configured, it will connect to your Wi-Fi network, providing it with access to the internet, the monitoring server, the MQTT broker, and remote data requests.  Support optional addition of up to 4 external Temperature probes.

The Pro Series supports both Secure and Non-Secure MQTT and Web services, enhanced control, custom configuration, and access control to settings. MQTT messaging is compatible with Home Assistant applications, including the option for  Auto MQTT Discovery, eliminating the need to manually add a JemRF sensor to your Home Assistant Dashboard. When connected to the Internet for more than 10 minutes, the local AP is disabled to eliminate an unused local WiFi Network.   Uses the industry-standard USB-C connection for power,

The Pro Series provides a white-labeling feature that allows custom settings and an optional password to minimize accidental changes when installed at remote locations.

Features:

• Easy to configure web interface. No programming or soldering skills required. You do not need the internet to configure the device. Connect to it directly from any WIFI device (e.g., PC, phone, tablet …)
• Send temperature and other data at a user-set interval
• Supports either Celsius or Fahrenheit temperature readings
• Powered either by USB-C 
• Supports and additional HTU21D Temperature and Humidity sensor. Measures temperatures from -40°C to +80°C. The Fahrenheit equivalent is -40°F to +176°F, with a ±0.5°C accuracy—measures humidity from 0-100%RH with 2% across the range.
  
• DIY interface Option for External Door or Window Contact with changes sent to an external server. 
• The external DS18B20 temperature sensors are accurate (±0.5°C) from -40°C to +80°C, with an upper limit of 120°C.
• **Note: The operating temperature of the sensors is large; for the WiFi Temperature sensor housing, it is -30F to +125.6F, -34C to 52C.  
• The device supports dual-WIFI mode, allowing it to act as both a WIFI access point and a WIFI client simultaneously. A Wi-Fi access point advertises its SSID and can be connected to by any Wi-Fi device or computer. 
• Once the unit has been online for 10 minutes, the local AP is disabled for security reasons. 
• A White Label option is supported.
• Optional JST-XH 2.0 2-pin connector with 6" lead for external door/window contact sensor.
• JST-XH 2.0 2-pin connector with 6" lead for External 3.2 VDC support.

Required, but not included:

• USB-C cable and USB power supply.

Installation:

• Follow the 3 easy steps using our illustrated guide
  

Specs:

• Dimensions 74mm x 55mm x 28mm
• Powered either by a USB-C cable or an optional 5Vdc, JST PH2.0 connector
• -34C to +52C. Fahrenheit equivalent is -30F to +125.6F, ±0.5°C accuracy from -10°C to +52°C