Regular price
WIFI Temperature and Humidity Sensor Pro
The WiFi Temperature and Humidity Sensor Pro is based on the ESP32C3, a Wi-Fi-enabled device that connects directly to your Wi-Fi router and can send Temperature and Humidity readings to the Monitoring Cloud Server or another monitoring application. It is fully assembled and requires no soldering. Connect it to power, and it will advertise itself as a wireless access point. Configure it through a web browser using its easy-to-use config application. Once configured, it will connect to your Wi-Fi network, providing it with access to the internet, the monitoring server, the MQTT broker, and remote data requests.
The Pro series supports both Secure and Non-Secure MQTT and Web services, enhanced control, custom configuration, and access control to settings.
** Contact us for a quote for longer external probes.
Features:
- Easy to configure web interface. No programming or soldering skills required. You do not need the internet to configure the device. Connect to it directly from any WIFI device (e.g., PC, phone, tablet …)
- Cyclic temperature transmission mode with configurable send interval
- Supports either Celsius or Fahrenheit temperature readings
- Powered either by USB-C
- Uses the HTU21D Temperature and Humidity sensor. Measures temperatures from -40°C to +80°C. The Fahrenheit equivalent is -40°F to +176°F, with a ±0.5°C accuracy—measures humidity from 0-100%RH with 2% across the range.
- Interface Option for External Door or Window Contact or a digital Flow Meter.
- The external DS18B20 sensors are accurate (±0.5°C) from -40°C to +80°C, with an upper limit of 120°C.
-
**Note: The operating temperature for the WiFi Temperature sensor is -30F to +125.6F, -34C to 52C.
- The device supports dual-WIFI mode, allowing it to act as both a WIFI access point and a WIFI client simultaneously. A WiFi access point advertises its SSID and can be connected to by any WiFi device.
- Once the unit has been online for 10 minutes, the local AP is disabled for security reasons.
- A White Label option is supported.
Required, but not included:
- USB-C cable and USB power supply.
Installation:
Specs:
- Dimensions 74mm x 55mm x 28mm
- Powered either by a USB-C cable or an optional 5Vdc, JST PH2.0 connector
- -34C to +52C. Fahrenheit equivalent is -30F to +125.6F, ±0.5°C accuracy from -10°C to +52°C
