WIFI Temperature and Humidity Sensor - Version 2

WIFI Temperature and Humidity Sensor - Version 2

$34.95 Solde

WIFI Temperature and Humidity Sensor - Version 2

This ESP32C3 power Wi-Fi-enabled device connects directly to your Wi-Fi router, allowing you to send temperature and humidity readings to the Monitoring Cloud Server or another monitoring application. It is fully assembled and requires no soldering. Connect it to power, and it will advertise itself as a wireless access point. Configure it through a web browser using its easy-to-use config application. Once configured, it will connect to your WIFI network, which will give it access to the internet and the monitoring server, MQTT broker, or remote data requests.

Features:

  • Easy to configure web interface. No programming or soldering skills required. You do not need the internet to configure the device. Connect to it directly from any WIFI device (e.g., PC, phone, tablet…)
  • Cyclic temperature transmission mode with configurable send interval
  • Supports either Celsius or Fahrenheit temperature readings
  • Powered either by USB-C 
  • HTU21D Temperature and Humidity sensor is used to detect the temperature and humidity. Measures temperatures from -40°C to +80°C. The Fahrenheit equivalent is -40°F to +176°F, with a ±0.5°C accuracy—measures humidity from 0-100%RH with 2% across the range.
  • **Note: The operating temperature for the WiFi Temperature sensor is -30F to +125.6F, -34C to 52C.  
  • Although the sensor is highly accurate (±0.5°C accuracy), you can calibrate the temperature reading using a configuration in the WIFI sensor app.
  • The device supports dual WIFI mode, allowing it to be a WIFI access point and a WIFI client simultaneously. A WIFI access point advertises itself through an SSID and can be connected to via any WIFI device or computer. 
  • Once the unit is online for 10 minutes, the local AP is disabled for security. 
  • Option to White Label is supported.

      Required, but not included:

      • USB-C cable and USB power supply.

      Installation:

      Specs:

      • Dimensions 74mm x 55mm x 28mm
      • Powered either by USB-C cable 
      • -34C to +52C. Fahrenheit equivalent is -30F to +125.6F, ±0.5°C accuracy from -10°C to +52°C