S32 WIFI Temperature and Humidity Sensor+

S32 WIFI Temperature and Humidity Sensor+

$32.95 Angebot

S32 WIFI Temperature and Humidity Sensor

This ESP32C3 power Wi-Fi-enabled device connects directly to your Wi-Fi router, allowing you to send temperature and humidity readings to the Monitoring Cloud Server or another monitoring application. It is fully assembled and requires no soldering. Connect it to power, and it will advertise itself as a wireless access point. Configure it through a web browser using its easy-to-use config application. Once configured, it will connect to your Wi-Fi network, providing it with access to the internet, the monitoring server, the MQTT broker, and remote data requests.
Supports both Secure and Non-Secure MQTT and Web services.

** Contact us for quote for longer external probes.

Features:

  • Easy to configure web interface. No programming or soldering skills required. You do not need the internet to configure the device. Connect to it directly from any WIFI device (e.g., PC, phone, tablet …)
  • Cyclic temperature transmission mode with configurable send interval
  • Supports either Celsius or Fahrenheit temperature readings
  • Powered either by USB-C 
  • HTU21D Temperature and Humidity sensor is used to detect the temperature and humidity. Measures temperatures from -40°C to +80°C. The Fahrenheit equivalent is -40°F to +176°F, with a ±0.5°C accuracy—measures humidity from 0-100%RH with 2% across the range.
  • The external sensors are accurate (±0.5°C) from -40°C to +80°C, with an upper limit of 120°C.
  • **Note: The operating temperature for the WiFi Temperature sensor is -30F to +125.6F, -34C to 52C.  
  • The device supports dual-WIFI mode, allowing it to act as both a WIFI access point and a WIFI client simultaneously. A Wi-Fi access point advertises itself via an SSID and can be connected to by any Wi-Fi device or computer. 
  • Once the unit is online for 10 minutes, the local AP is disabled for security. 
  • A White Label option is supported.

      Required, but not included:

      • USB-C cable and USB power supply.

      Installation:

      Specs:

      • Dimensions 74mm x 55mm x 28mm
      • Powered either by USB-C cable or optional 5Vdc, JST PH2.0 connector
      • -34C to +52C. Fahrenheit equivalent is -30F to +125.6F, ±0.5°C accuracy from -10°C to +52°C